Sitar Factory

Both Rikhi Ram brothers Ajay & Sanjay, and after them many others, make and sell this handy and compact sitar. Some call it “Ovation” sitar, some call it “Studio” sitar and also “Travel” sitar is commonly used for this successful innovative musical instrument. Commercially it is a succes. No doubt about that.

But here is a list of remarks and complaints with which players came to me after they have been buying a new travel sitar in New Delhi.   In my opinion there are a number of improvements that could be achieved rather easily:

The pickup doesn’t sound good, and comes loose in no time. So you can install a better one. (see Travel Sitar Mods (1) )

The tuning machines are cheap and crappy, and can get stuck after a few string changes. Also here it’s a good investment to install better ones. (see Travel Sitar Mods (1) )

Not much care has been taken to fit the jora tar properly.  Only one travel sitar from Sanjay’s Rikhi Ram was ok. Too often there is need for intonation adjustment. (see Travel Sitar Mods (2) )

There are also some complaints about the finishing touch:

Parda’s which were made too short are installed anyways. A friend of mine has lost a parda while performing on stage with his “brand new” instrument. Floops, suddenly there it goes…

The new style decoration strips look like a cheap copy of simple western repetitive patterns. And when they are fit on the body they are not always correctly matching.

And finally there is my personal opinion concerning the “amputated” head. Of course this square leftover stump is one of the main basic improvements made to recent sitar making and playing in general since many years. But to me, it doesn’t look beautiful. I regret the  lack of creativity. Isn’t it a missed chance to make this sitar look nicer on stage?

So, inspired by my own developed series of new style sitars I want to introduce my ultimate travel sitar modification. For this experiment I use a travel sitar body which I’ve been buying from Raj Musicals in New Delhi.

I started with opening the sitar neck and removing the square stump piece. Then  I created a new head piece derived from the SAS and SBS sitar heads draft. In order to maintain strenght in the new construction the original neck’s top plate also had to be renewed. The celluloid decoration will be re-used on top of the new plate.

To be continued…

The flower sitar in the hands of its proudly owner, Thierry.
The sitar is ready but it’s not really sufficiently solid to actually play it. Too bad…

Here is an introduction to the Fosse Electric Sitar. This instrument replicates the sound of the classic indian sitar. It is a new solid body electric instrument made out of carbon fiber by Gregg Fosse.

More info on www.fossesitar.com (soon ??).

This beautiful sarod was made by late Kartar Chand in the 80’s. Pictures made by Luc De Gezelle.

His shop still exists and is now run by his brother Hari Chand. It is located in Paharganj, New Delhi.

Visit their shop here.

During my learning school at Centrum voor MuziekinstrumentenBouw, CMB, at Puurs, Belgium, in 2000 I made a Gibson EB-3L replica. I’ve choosen this electric bass because of the unique and original “slotted head” construction which I applied later to my new style sitars SAS-01 etc…

This guitar has a Honduras mahogany body and neck with Indian rosewood fretboard and head top plate.
Because the original instruments sound wasn’t very inspiring I decided to replace the pickups with some modern and better performing types made by Di Marzio. Their DP145 Will Power™ neck model is very deep-sounding with great low-end definition. Its dimensions are the same as the original replacement Model One™, but it’s a little louder and fatter-sounding, and pole piece spacing is slightly wider for better string alignment with long-scale basses.

Click here to look at some nice pictures made by Luc De Gezelle.

During my last trip to India in march 2009, I collected some sitar bodies and other instruments.
Now they finally arrived, after more then 7 months…

Next to a variety of techno-organisatory problems which caused the delay, the packing service got worse as well.

This is the result: severely broken tumba on brand new gents vocal tanpura.

New page added with more semi-acoustic sitar & solidbody sitar pictures. These pictures (most of them) are made by Luc De Gezelle. The pictures are coming in autoviewer slideshow mode… Feel free to take a look here.

Specs and other info about these instruments can be found here.

Or download the new style sitars pdf brochure.

This modification I made to Mark B’s Travel sitar because he was unable to play the jora tar comfortably. The steel wire jora tar, although open correctly tuned, sounded too high while playing a note on the pardas.

I added a fibre intonation block to the jora tar, just as I did with my own made SAS and SBS sitars. Now he can play the jora tar up to the middle note Sa without any problem and accurately without meend.

I ‘ve made some simple and interesting technical modifications to Frederic T’s new travel sitar. He has bought it last year in New Delhi.

1) I have installed Schaller™ M6 mini machine heads. These run so much more smooth and accurate then the rather cheap and crappy original machines.

2) Also mounted a Kent Armstrong Slimbucker™ Jazz guitar pickup which brings it very close to the sound of a full scale Jazz Sitar.

Today is the annual Vishwakarma puja.

Hari Om

The 2 bodies have undergone the finishing strokes : fine sanding, Danish oil treatment, parda making & setting, stringing and jiwari. And after assembling the hardware I could finally mount the pickups and electronics. A Kent Armstrong Slimbucker™ Jazz guitar pickup is on one of them, together with two black buttons : one for volume and one for tone control. The other sitar remains without a pickup. Thus leaving the option open to mount a customer’s desired type or combination.